Commercial Topping® Technical Data Sheet
|
Compressive Strength Range |
Typical range of 4,000 to 4,500 (28 to 31.0 MPa) |
| Point Loading |
Typical loading of up to 3,500 lbs. on a 1" (1589 kg on a 25.4 mm) diameter disc |
| VOC Content | <0.24 mg/m3 |
| Dry Density | 125 lbs./ft³ (2,000 kg/m³) |
| Weight |
At 1/2", less than 5.3 lbs./sq. ft. (At 12.7 mm, less than 25.9 kg/m2) |
| Flexural Strength |
(ASTM C 348) 1660 psi (11.4 MPa) after 28 days |
| Tensile Strength |
(ASTM C 190) 460 psi (3.2 MPa) after 28 days |
|
Surface Burning Characteristic |
Flame spread: 0 Fuel contributed: 0 Smoke density: 0 |
Green' Information:
| Sample USGBC LEED Credit Areas* | |||
| Project | Credit | Category | How Requirement is Fulfilled |
| Indoor Environmental Quality | IEQ 3.2 | Air Quality Before Occupancy | GREENGUARD Certified (Field testing MUST be completed prior to claiming credit) |
| IEQ 4.3 | Low Emitting Materials: Floor System | GREENGUARD Children & Schools Certified | |
| Materials & Resources | MR 2.1-2.2 | Construction Waste Management | Recyclable packaging and shipping materials |
| MR 4 | Recycled Content | Fly Ash | |
| MR 5 | Local/Regional Materials | Manufactured in Blue Rapids, KS 66411; Las Vegas, NV 89035; Camden, NJ 08103; Job site manufactured with local sand & water | |
| Innovation & Design | ID 1 | Sound Control | Enhanced living environment |