Tailor-Made Solutions for Every Floor Challenge
New construction and renovation projects present their own special challenges. But Rapid Floor Systems offers specific solutions, so you can customize installation for each project.

Rapid Floor® offers the advantage of a smooth, joint-free surface and is an excellent alternative to double wood floor construction in new, multifamily residential projects.

Rapid Floor® Plus provides the extra muscle required when the job calls for a tougher, more durable surface. Its flexible compressive strength can be formulated to range from 2000 to 3200 psi (14 to 22 MPa), for the increased surface hardness that's critical in renovation, single family and commercial projects.

Rapid Floor® Ultra is formulated to provide compressive strengths ranging from 2500 to 4000 psi (17.2 to 27.4 MPa), and offers an economical alternative to many concrete floor underlayment applications in commercial and renovation projects.

Rapid Radiant® is the ultimate underlayment for radiant heat applications. Poured over hot water tubes or electric heating cables, it maximizes radiant heat performance while withstanding temperature fluctuations.

Level-Right® Self-Leveling Floor Underlayment is a specially formulated, high-strength, cementitious underlayment that can handle any floor leveling challenge - without shotblasting or scarifying.

Level-Right® Plus is a multi-purpose self-leveling floor underlayment, ideal for thin or thick topping applications over concrete.  Levels, smooths and repairs, all with superior speed and a high strength set.  It's the superior solution for 0-1 1/2" (0-38mm).  Dries fast to keep your job on schedule.

Level-Right® FS-10 is used when the job calls for a new floor that's smooth, level and super fast-setting.  Levels, smoothes, and repairs 0 - 3/8" (0-10 mm).

Level-Right® WearTop is ideal for fast track retrofits. Level-Right WearTop is the answer for old or damaged concrete floors that need a new, smooth and level wear surface. Commonly used in retail, commercial and light manufacturing applications, it provides a smooth, permanent wear surface.

Commercial Topping® is fast drying and achieves compressive strengths up to 4500 psi (31 MPa).  It's the ideal underlayment to meet ASTM F710 "Preparing Concrete to Receive Resilient Flooring".  Plus it pours over VAT, VCT, terrazzo or ceramic, with no shotblasting required.

DPM is a unique 2-component, moisture tolerant, extremely high density, chemically enhanced epoxy based product which prevents the passage of water vapor and moisture through slabs or walls on or below grade, thus eliminating delamination of adhesives, floor coverings and coatings. It also prevents capillary infiltration of oil or other chemicals from the ground and can be used to treat oil contaminated slabs.

CSM is a reinforcement product used in conjunction with Maxxon Underlayments for crack suppression.  CSM consists of a nylon core of fused, entangled filaments and a geotextile fabric bonded to one side.

Acousti-Mat® II
The Low Profile Option
The cost-effective solution to "noise" complaints, even with ceramic and wood floors.  The system actually isolates sound waves, reducing transmission of impact and airborne sound up to one half.

Acousti-Mat® 3

For Super Sound Contol

The sound deadening solution for floor systems that have been impossible to control! Now you can put an end to those "noise" complaints - even with open beam, concrete slab and conventional wood frame systems.

Enkasonic® creates sound-rated floors with the high IIC and STC level required by ICBO, UBC and FHA for luxury developments.

Acousti-Mat® CLP
The new, permanent solution for impact sound control in concrete construction. Achieves a Delta IIC of 19, that's approximately a 75% reduction in impact noise on concrete floor systems.