Rapid Floor® Plus Technical Data Sheet
|
Compressive Strength Range |
Up to 3,200 psi (22.1 Mpa) when tested in accordance with modified ASTM C 472 |
| Density |
Typical density of 115 pounds per cubic foot (1,840 kg/m3) |
|
Coefficient of Conductivity (K): |
4.3 Btu · in/hour-°F-ft2 (.68 W/[m· °C]) |
| Specific Heat: |
.25 Btu/(lb· °F) at 85 °F (.94 kJ[kg· °at 29.44 °C) |
| Acoustical Performance |
The acoustical performance of Rapid Floor® Plus is similar to Rapid Floor® Underlayment. Contact Rapid Floor Systems for reports. |
|
Surface Burning Characteristics |
Flame spread index - 0, fuel contributed - 0, smoke development - 0 (ASTM E 84) |
| Point Loading |
Typical loading of up to 2500 lbs (1134 kg) on a 1" (25.4 mm) dia. Disk |
Green' Information:
| Sample USGBC LEED Credit Areas* | |||
| Project | Credit | Category | How Requirement is Fulfilled |
| Indoor Environmental Quality | IEQ 3.2 | Air Quality Before Occupancy | GREENGUARD Certified (Field testing MUST be completed prior to claiming credit) |
| IEQ 4.3 | Low Emitting Materials: Floor System | GREENGUARD Children & Schools Certified | |
| Materials & Resources | MR 2 | Construction Waste Management | Recyclable packaging and shipping materials |
| MR 4 | Recycled Content | Fly Ash | |
| MR 5 | Local/Regional Materials | Manufactured in Blue Rapids, KS 66411; Las Vegas, NV 89035; Camden, NJ 08103; Job site manufactured with local sand & water | |
| Innovation & Design | ID 1 | Sound Control | Enhanced living environment |