Rapid Radiant® Technical Data Sheet
|
Compressive Strength Range |
2000 - 3000 psi (14 - 21 MPa) when tested in accordance with modified ASTM C 472. |
| Installed Weight |
1-1/4" (32mm) = 12.7 lb/ft2 (58.7 kg/m2) |
| Dry Density |
115 lbs./ft3 (1840 kg/m3 ) |
| K-Factor |
4.96 Btu · in/(h·ft2·°F) (.7142 W/[m·°C]) |
| Specific Heat |
.224 Btu/(lb·°F) at 85°F (.9385 kJ[kg·°C] at 29.44 ·°C) |
| Acoustical Performance |
The acoustical performance of Rapid Radiant ® is similar to Rapid Floor® Underlayment. Contact Rapid Floor Systems for reports. |
|
Surface Burning Characteristics |
Flame spread index - 0, fuel contributed - 0, smoke development - 0. (ASTM E 84) |
| Point Loading |
Typical loading of up to 2500 pounds (1134 kg) on a 1" (25.4 mm) diameter disk @ 0.007" max. indentation |
Green' Information:
| Sample USGBC LEED Credit Areas* | |||
| Project | Credit | Category | How Requirement is Fulfilled |
| Indoor Environmental Quality | IEQ 3.2 | Air Quality Before Occupancy | GREENGUARD Certified (Field testing MUST be completed prior to claiming credit) |
| IEQ 4.3 | Low Emitting Materials: Floor System | GREENGUARD Children & Schools Certified | |
| Materials & Resources | MR 2 | Construction Waste Management | Recyclable packaging and shipping materials |
| MR 4 | Recycled Content | Fly Ash | |
| MR 5 | Local/Regional Materials | Manufactured in Blue Rapids, KS 66411; Las Vegas, NV 89035; Camden, NJ 08103; Job site manufactured with local sand & water | |
| Innovation & Design | ID 1 | Sound Control | Enhanced living environment |